Product Info
PFA Lower Wishbone Brake Reaction Ball Joint Tab Washer DB4 Until DBSV8
Aston Martin Lower Wishbone Brake Reaction Ball Joint Tab Washer – DB4 Until DBS V8
Protect your front braking stability and prevent critical suspension hardware from loosening under heavy deceleration with the Aston Martin lower wishbone brake reaction ball joint tab washer. Specifically manufactured for classic Aston Martin models from the DB4 through to the DBS V8, this vital locking washer secures the brake reaction ball joint assembly firmly to the lower wishbone. Because heavy braking transfers immense longitudinal forces directly through the reaction arm into the front suspension, reusing fatigued original tab washers creates a serious mechanical hazard. Therefore, fitting new Aston Martin lower wishbone brake reaction ball joint tab washers during any suspension or brake overhaul guarantees positive fastener retention, crisp braking response, and total safety on both road and rally vehicles.
Product Overview
During hard braking, the lower wishbone brake reaction arm resists fore-and-aft wheel movement, subjecting the ball joint retaining hardware to intense shock loads and vibration. Consequently, any loosening of the retaining fastener can compromise caster alignment, induce steering pull under braking, or cause catastrophic joint separation. To prevent this failure, the Aston Martin lower wishbone brake reaction ball joint tab washer folds tightly against the flat faces of the securing nut, creating a reliable mechanical lock that withstands repeated thermal and load cycling.
Furthermore, because steel locking tabs suffer from work-hardening and metal fatigue once bent and straightened, replacing them with fresh units is essential workshop practice whenever servicing the front suspension. As a result, restorers and race engineers can assemble the lower wishbone brake reaction joint to factory torque specifications with complete confidence.
-
Vehicle Compatibility: Fits lower front wishbone brake reaction ball joint assemblies across classic Aston Martin models (LHD & RHD):
-
Aston Martin DB4, DB4GT & Zagato
-
Aston Martin DB5
-
Aston Martin DB6 & DB6 Mk2
-
Aston Martin DBS (6-Cylinder)
-
Aston Martin DBS V8
-
-
Quantity Required: Sold individually — 2 required per vehicle (one per side).
-
Essential Service Item: Must be replaced whenever dismantling or rebuilding the front lower wishbones or brake reaction joints.
Technical Specifications for the Aston Martin Lower Wishbone Brake Reaction Ball Joint Tab Washer
| Feature | Detail |
| Part Type | Front Lower Wishbone Brake Reaction Ball Joint Tab Washer |
| Application | Positively locks the brake reaction ball joint fastener against braking loads |
| Quantity Per Vehicle | Sold Individually (2 required per vehicle) |
| Replaces Factory Number | 20-23-115 |
| Our Part Number | PFA-20-23-115-R |
| Drive Compatibility | Fits both LHD & RHD chassis |
Parts Book Reference Guide
Cross-reference your original factory parts catalogues using these exact locations:
| Model | Parts Catalogue / Publication | Page | Item Number |
| DB4 | Plate N | Page 48 | Item 3 |
| DB5 | IGA107 | Page 4-5 | Item 3 |
| DB6 & DB6 Mk2 | DB6 Parts Catalogue | Page 4-7 | Item 3 |
| DBS (6-Cylinder) | IGA107B | Page 4-7 | Item 3 |
| DBS V8 | DF8112/4/71/DBSV8 | Page 4-6 | Item 3 |
Key Features & Performance Benefits
-
Secures Critical Braking Hardware: Prevents the brake reaction ball joint nut from backing off under severe braking forces and road vibration.
-
Eliminates Work-Hardening Failures: Replaces brittle, previously bent washers that are prone to cracking when re-used during suspension maintenance.
-
Exact OEM Specification: Precision-stamped to match original factory dimensions, directly replacing Aston Martin part number
20-23-115. -
Maintains Front Suspension Geometry: Keeps the brake reaction joint locked tight to preserve accurate caster angles and straight-line braking stability.
-
Universal LHD & RHD Fitment: Fits both left-hand and right-hand drive front suspension assemblies without modification.
Need assistance with your front suspension or brake reaction arm rebuild? We specialise in supplying authentic and precision-engineered components for classic Aston Martin models. If you need help sourcing oversize lower ball joint bearing cups, reaction arms, bushes, or spindle tab washers, please contact our team for expert technical guidance.
Parts For Astons is an independent business dedicated to providing high-quality parts primarily for Aston Martin vehicles. Our expertise stems from years of passion and experience with Aston Martins from restoration and race preparation (and everything inbetween), ensuring every part we offer meets the exacting standards of these iconic vehicles.
We manufacture our own parts using our own designs which are developed in-house and rigorously tested before going to market. This enables us to manage our own quality control to ensure you receive a part which is 100% fit for purpose. If we do not have a part in stock, we can manufacture it quickly.
Closely associated with Goldsmith And Young, you can trust in our commitment to quality and personalised service for your restoration or performance needs. Should you have any questions, please do not hesitate to reach out and ask.
Additional information
| OEM | 020-023-115 |
|---|
You must be logged in to post a review.





Reviews