Product Info
PFA Suspension Ball Joint Cap Circlip Various Classic Models
Aston Martin Suspension Ball Joint Cap Circlip – Classic Models DB4 to AM V8
Secure your front swivel ball joint assemblies and prevent end-cap dislodgement with our precision-engineered Aston Martin suspension ball joint cap circlip. Designed to fit both the upper and lower ball joint retaining caps across classic Aston Martin models from the DB4 through to the AM V8, this heavy-duty retaining ring plays a vital role in front suspension integrity. Because front ball joints endure continuous vertical shock loads, cornering forces, and grease pressure, reusing stretched or corroded original circlips creates a serious mechanical risk. Therefore, installing fresh Aston Martin suspension ball joint cap circlips during any front suspension rebuild ensures positive end-cap retention, clean grease sealing, and complete peace of mind on both road and competition vehicles.
Product Overview
On classic Aston Martin front suspension uprights, the upper and lower swivel ball joints rely on precision-machined caps to retain internal bearing cups, shims, and high-pressure grease. Consequently, the retaining circlip must sit cleanly within its machined groove to hold the cap firmly under constant suspension articulation. Over decades of service, original circlips frequently suffer from corrosion, loss of spring tension, or distortion caused by removal pliers.
To eliminate the danger of a ball joint cap working loose, our replacement circlip is manufactured from high-tensile spring steel to exact factory dimensions. Furthermore, because this component fits both top and bottom ball joint positions across six classic model generations, restorers and race mechanics can service the entire front upright assembly with uniform, reliable hardware. As a result, your ball joints remain tightly sealed against water and road grit while maintaining accurate suspension geometry.
-
Vehicle Compatibility: Fits upper and lower front suspension ball joint caps across classic Aston Martin models (LHD & RHD):
-
Aston Martin DB4, DB4GT & Zagato
-
Aston Martin DB5
-
Aston Martin DB6 & DB6 Mk2
-
Aston Martin DBS (6-Cylinder)
-
Aston Martin DBS V8
-
Aston Martin V8 (AMV8 Series)
-
-
Application Position: Suitable for both top (upper) and bottom (lower) ball joint retaining caps.
-
Essential Overhaul Item: Always replace circlips whenever dismantling, shimming, or greasing front ball joint assemblies.
Technical Specifications for the Aston Martin Suspension Ball Joint Cap Circlip
| Feature | Detail |
| Part Type | Front Suspension Upper & Lower Ball Joint Cap Retaining Circlip |
| Material | High-Tensile Spring Steel |
| Fitting Position | Top & Bottom Ball Joint End Caps |
| Replaces Factory Number | 112390 |
| Our Part Number | PFA-112390-R |
| Drive Compatibility | Fits both LHD & RHD chassis |
Parts Book Reference Guide
Cross-reference your original factory parts catalogues using these exact locations:
| Model | Parts Catalogue / Publication | Page | Item Number |
| DB4 | Plate N | Page 48 | Item 53 |
| DB5 | IGA107 | Page 4-7 | Item 62 |
| DB6 & DB6 Mk2 | DB6 Parts Catalogue | Page 4-7 | Item 62 |
| DBS (6-Cylinder) | IGA107B | Page 4-7 | Item 62 |
| DBS V8 | DF8112/4/71/DBSV8 | Page 4-6 | Item 62 |
| AM V8 | TP5078-I-0890-150 (AM1147L) | Page 4.2.3 | Items 66 & 88 |
Key Features & Performance Benefits
-
Positive End-Cap Retention: Locks upper and lower ball joint caps securely in place against heavy cornering loads, road shocks, and grease gun pressure.
-
Eliminates Spring Fatigue Risks: Replaces old, stretched, or rusted circlips that lose radial tension after removal.
-
Dual-Position Versatility: Fits both top and bottom ball joint caps, simplifying parts ordering during a complete front suspension rebuild.
-
Direct OEM Specification: Manufactured to exact factory tolerances to replace Aston Martin part number
112390from the DB4 through to the AM V8. -
Protects Internal Bearing Surfaces: Keeps ball joint caps seated squarely to prevent grease leaks and block moisture or road dirt ingress.
Need assistance with your front ball joint rebuild or upright overhaul? We specialise in supplying authentic and precision-engineered components for classic Aston Martin models. If you need help sourcing oversize lower ball joint brass bearing cups, ball pins, gaiter boots, or shims, please contact our team for expert technical guidance.
Parts For Astons is an independent business dedicated to providing high-quality parts primarily for Aston Martin vehicles. Our expertise stems from years of passion and experience with Aston Martins from restoration and race preparation (and everything inbetween), ensuring every part we offer meets the exacting standards of these iconic vehicles.
We manufacture our own parts using our own designs which are developed in-house and rigorously tested before going to market. This enables us to manage our own quality control to ensure you receive a part which is 100% fit for purpose. If we do not have a part in stock, we can manufacture it quickly.
Closely associated with Goldsmith And Young, you can trust in our commitment to quality and personalised service for your restoration or performance needs. Should you have any questions, please do not hesitate to reach out and ask.
Additional information
| OEM | 112390 |
|---|
You must be logged in to post a review.





Reviews